BS 6246 Pt.4-1983 工业用洗衣机.第4部分:织物间歇式干燥滚筒使用效果的评定方法
作者:标准资料网 时间:2024-05-20 19:41:51 浏览:8496
来源:标准资料网
【英文标准名称】:Industriallaundrymachinery.Methodsfortheassessmentoftheeffectofbatchdryingtumblersontextiles
【原文标准名称】:工业用洗衣机.第4部分:织物间歇式干燥滚筒使用效果的评定方法
【标准号】:BS6246Pt.4-1983
【标准状态】:作废
【国别】:英国
【发布日期】:1983-05-31
【实施或试行日期】:
【发布单位】:英国标准学会(BSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:时间测量;工业的;床单;纺织产品;洗衣设备;操作时间;毛巾;能量消耗;干燥机(加热设备);电耗;试样制备;温度测量;电学测量;水含量的测定;热学;潮气测量;滚筒干衣机;纺织材料;性能试验;试样
【英文主题词】:
【摘要】:
【中国标准分类号】:Y62
【国际标准分类号】:
【页数】:12P;A4
【正文语种】:英语
基本信息
标准名称: | 草甘膦原药 |
英文名称: | Glyphosate technical |
中标分类: |
化工 >>
化肥、农药 >>
农药 |
ICS分类: |
农业 >>
杀虫剂和其他农用化工产品
|
替代情况: | 被GB 12686-2004代替 |
发布部门: | 国家技术监督局 |
发布日期: | 1990-12-30 |
实施日期: | 1991-12-01 |
首发日期: | 1990-12-30 |
作废日期: | 2005-10-01 |
归口单位: | 中国石油和化学工业协会 |
起草单位: | 贵州化工研究所 |
出版日期: | 1900-01-01 |
页数: | 6 |
适用范围
本标准规定了草甘膦原药的技术要求,试验方法,检验规则及产品标志。提出了在包装、运输和贮存中应注意的事项。本标准适用于由甘氨酸、多聚甲醛、亚磷酸二烷基酯为主要原料合成的草甘膦原药。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 化工 化肥 农药 农药 农业 杀虫剂和其他农用化工产品
Product Code:SAE J2050
Title:High-Temperature Power Steering Pressure Hose
Issuing Committee:Automotive Brake And Steering Hose Standards Comm
Scope: This SAE Standard covers two types of hose fabricated from textile reinforcement and synthetic rubber, assembled with end fittings for use in high-temperature automotive power steering applications as flexible connections within the temperature range of -40 to +150 掳C (-40 to +302 掳F) maximum and 10.3 MPa (1500 psi) maximum working pressure. These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsation is required. Class A hose has a nominal OD of 19.84 mm (0.781 in). Class B hose is a lightweight hose with a nominal OD of 17.91 mm (0.705 in). This specification defines the minimum performance levels of a flexible connector in the hydraulic steering system to convey power steering fluid from the steering pump to the steering gear.
Rationale: This SAE Standard covers two types of hose fabricated from textile reinforcement and synthetic rubber, assembled with end fittings for use in high-temperature automotive power steering applications as flexible connections within the temperature range of -40 to +150 掳C (-40 to +302 掳F) maximum and 10.3 MPa (1500 psi) maximum working pressure. These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsation is required. Class A hose has a nominal OD of 19.84 mm (0.781 in). Class B hose is a lightweight hose with a nominal OD of 17.91 mm (0.705 in). This specification defines the minimum performance levels of a flexible connector in the hydraulic steering system to convey power steering fluid from the steering pump to the steering gear.